Let’s chat about covers — starting with the basics.
The price of a mattress affects what goes into its cover as well as its core. With a budget fibre mattress, you’re generally looking at a basic cover arrangement. It might look lovely, but what does each layer actually do?
In the construction I’m describing, you start with the fibre core wrapped in stockinette.
Next comes a waterproof band, slipped around the middle of the core. This might be made from a nonwoven fabric with a waterproof coating. The exact material and the area it protects depend on the mattress.
Finally, the outer cover goes over the top. A basic microfibre cover can look attractive and allow air through the fabric.
100% natural. 100% breathable.
100% waterproof.
All three in one fabric? In my 30 years in the baby mattress business, I haven’t found it.
If a seller promises all three, ask what every layer contains and what testing supports the claim. A cotton surface can hide a synthetic waterproof membrane — and that means the complete fabric is not 100% natural.
“Breathable” needs explaining too: allowing moisture vapour through is different from allowing air to flow freely.
A coir-and-wool mattress will have a cotton cover already fitted. That’s the finished mattress as supplied.
But then you notice the instructions: you also need a waterproof protector. That’s an additional purchase, fitted over the cotton cover that’s already on the mattress.
So, in the example I’m describing, you might spend over £100 on the mattress, then another £30 or so on its waterproof protector. Make sure you include that extra cost when comparing prices.
Cotton on the outside — but what’s in the middle?
The protector itself may have cotton on both faces, with a thin polyurethane membrane — usually called PU — sandwiched between them. It feels like cotton, but the membrane provides the waterproof protection.
Your layers are now: coir, wool, the original cotton cover, then the separate waterproof protector over it.
There’s nothing inherently wrong with that arrangement. But I think parents should understand what they’re buying, what is included and what they still need to add.
There is another arrangement we can look at next.
A different approach —
the cover system I developed.
The idea behind EasyChange is simple: keep the mattress core protected while making the sleeping surface easy to change.
We use the system on several bases, including foam, foam with pocket springs, and coir-and-wool constructions. It’s a fitted system supplied with the mattress, rather than a universal cover to put over any mattress.
One cover protects. Another zips onto it.
First comes the fitted Safetex waterproof base cover, enclosing the core. Around its perimeter is another zip, which takes the removable sleeping surface.
That surface combines Coolmax fabric with Maxispace spacer fabric bonded underneath.
What about temperature control?
The aim is to help manage warmth and moisture at the sleeping surface. Coolmax technology moves moisture along its fibres towards the fabric surface, where it can spread and evaporate. The Maxispace spacer fabric provides an open structure beneath it, allowing air to move within that layer.
Those are the moisture-management and airflow features I mean when talking about temperature control. The cover does not guarantee that a baby cannot overheat: room temperature, clothing and bedding still matter. Follow current safer-sleep advice and the supplied product instructions.
Two zip-on toppers: one to use, one spare.
The set comes with two removable topper covers, so you can zip on the spare topper while the other is in the wash.
Because nappies always seem to leak at three in the morning, just when you’re finally fast asleep. Especially the one Granddad put on. He says it was fitted perfectly. The wet pyjamas suggest otherwise.
Unzip the used sleeping surface. If liquid has reached the waterproof base cover, clean it according to the supplied care instructions and let it dry. Then zip on the clean spare topper and put the used topper in the wash.
The waterproof base stays around the mattress core throughout the change. You use one sleeping surface at a time, with the second ready when needed.
Watch Kate demonstrate it in the video below — she makes rather quicker work of it than my explanation!
See the cover change in action.
Press the play button below and let Kate show you how the covers work. Then read on for the parts that make up the EasyChange system.

03 / THE COVER MATTERS
Zip off. Change over.
Keep the core protected.
Our preferred cover arrangement: a breathable fabric surface, a clean spare and waterproof protection underneath.
The pictures below show how the waterproof base, zip-on sleeping surface and clean spare fit together. This guide is published by the owner of The Cot Mattress Company, which developed EasyChange.
Four practical things to check
- Liquid protectionIs it waterproof or merely water-resistant? Which layer protects the core?
- Wash instructionsWhat temperature is permitted, how is it dried, and can it be refitted without shrinking?
- Replacement coversCan you obtain an approved spare that fits this exact mattress?
- Fit after washingThe cover should fit as intended and leave the finished surface firm and flat.




Do not assume a breathable outer fabric will stop liquid reaching the core. EasyChange provides a separate fitted waterproof base beneath its removable surface. “Breathable” can mean airflow or moisture-vapour transmission; it does not establish a safety advantage or replace a firm, flat surface and waterproof protection.
A removable cover is part of the specified mattress system. Do not add soft toppers, extra padding or improvised layers.